News

On The Construction Elevator, For The Landing Door Above It, There Are Also Some Corresponding Regulations And Requirements, Which Must Be Observed. So, What Does It Specifically Include? The Following Editor Will Give You The Answer, Hoping To Give You Some Help And Inspiration, So As To Make Progress, In This Respect, And Make Yourself Gain More. For The Landing Door On The Construction Elevator, The Relevant Requirements Are As Follows: (1) The Landing Door Of The Construction Elevator Shall Be Able To Ensure That There Is No Personnel In And Out When It Is Closed. (2) The Net Height Of The Landing Door Shall Not Be Less Than 1.8m; The Difference Between The Net Width And The Width Of The Cage Inlet And Outlet Shall Not Be Greater Than 120mm. (3) For Horizontal And Vertical Sliding Landing Doors, Guide Devices Shall Be Set At Corresponding Upper And Lower Sides Or Both Sides. (4) For The Mechanical Drive Landing Door, The Opening And Closing Shall Be Carried Out By A Specially Assigned Person, And The Cage Motion Cannot Be Used For Direct Control. (5) The Locking Device In The Landing Door, As Well As The Installation Device Of Its Accessories, Shall Be Set In A Place That Is Not Easy For People To Touch Or Touch. (6) The Layer Door Locking Device Shall Be Firm And Reliable, And The Protective Cover Shall Be Added.