News

For Basket Manufacturers, There Are Many Kinds Of Basket Products That Can Be Produced, Such As Electric Basket, Construction Basket And High-altitude Work Basket, Which Are Commonly Used In Our Daily Construction Activities. So Below, May As Well Choose One Of Them, Is For High-altitude Work Basket, To Learn And Understand. &Nbsp; & Nbsp; & Nbsp; 1. Requirements For Safety Ropes In Basket For Aerial Work &For The Safety Rope On The High Altitude Work Basket, Some Regulations And Requirements Summarized By Wuxi Basket Manufacturer Huake Are As Follows: &Generally Speaking, The Safety Rope Should Be Hung In Advance And Separated From The Steel Wire Rope, Not Both. In Addition, It Is Required That It Will Not Deform And Damage Under Static Load. &In Order To Avoid This Problem, Some Protective Measures Should Be Taken, Such As Adding Rubber Skin, Soft Cushion, Etc., To The Parts Where The Safety Rope Is Rubbing With The Building Or The Parts That May Be Scratched By Sharp Objects. &Nbsp; & Nbsp; (3) When The Safety Rope Needs To Be Used, It Is Necessary To Check It Before Use, And It Should Be Carried Out Comprehensively. If Any Damage Is Found, It Shall Be Stopped Immediately. &After Using The Safety Rope For A Certain Period Of Time, The Static Load Test Shall Be Carried Out To Check Whether Its Performance Meets The Standard. If Not, The Safety Rope Shall Be Replaced In Time. &Nbsp; & Nbsp; & Nbsp; 2. Code For Safe Operation Of High Altitude Work Basket &For The Work At Height, The Key Point Is To Take Safety Protection Measures. For Example, Fasten The Safety Belt, Safety Rope, And Put The Safety Buckle In The Correct Position. For The Fixation Of Safety Rope, The Reliable Part On The Building Shall Be Selected To Increase The Safety Factor. &There Should Be Upper And Lower Limit Devices On The Basket For Aerial Work, Which Is Necessary To Increase The Safety Of The Basket Itself. &For The Lifting Operation Of The High-altitude Work Basket, The Height Difference Between The Two Ends Of The Working Platform Is Required By Regulations, Generally There Will Be A Specific Value, Which Cannot Exceed The Specified Range. Moreover, According To Different Suspension Height, The Platform Length Matching With It Should Be Selected Instead Of Blind Selection.