Some Regulations And Component Requirements In The Construction Of High Altitude Work Basket
作者:Admin
阅读:1546
We Believe That The High-altitude Work Hanging Basket In The Hanging Basket Is Not Strange. It Is Not Only One Of The Types Of Hanging Basket, But Also Involved In The Articles On The Website. Therefore, We Can Learn And Master The Relevant Knowledge To Be Familiar With This Kind Of Hanging Basket. Next, We Will Continue This Work, Hoping To Let You Know More About The High-altitude Work Basket, At The Same Time, We Can Also Promote The Learning Process Of The Product.
1. Some Instructions For Winter Construction Of High Altitude Work Basket
If The High-altitude Work Basket Is To Be Constructed In Winter, Then We Should Know That:
(1) In The Process Of Construction, It Is Necessary To Avoid Splashing Water Everywhere, So As Not To Make The Road Surface Wet And Slippery Due To Freezing, So As To Cause Accidents Or Dangers Due To Falling Of Personnel.
(2) In Case Of Heavy Fog, The Construction Shall Be Stopped Rather Than Forced. In Addition, In The Case Of Sufficient Sunshine, Use The High-altitude Work Basket To Avoid Accidents, So As To Ensure The Safety Of Its Use.
2. Is The Construction Allowed In Case Of Thunderstorm During The Use Of High-altitude Work Basket?
In Case Of Thunderstorm, The High-altitude Work Basket Cannot Be Used, Because It Is Very Dangerous And Has Potential Safety Hazards. Therefore, Construction Is Strictly Prohibited. Moreover, Before The Arrival Of Thunderstorm, The Grounding Condition Of The Basket Shall Be Checked To See If It Is Well Grounded.
3. What Are The Specific Regulations Or Requirements For The Safety Rope And Safety Lock In The Basket For Aerial Work?
The Safety Rope And Safety Lock Catch Are Two Very Important Parts Of The Work Basket At Height, So It Should Be Ensured That They Can Be Used Normally, So As To Ensure The Safety Of The Use Of The Basket. For These Two, The Provisions And Requirements Are As Follows:
The Safety Rope In The Basket For Aerial Work Shall Meet The Requirements Of Relevant Standards, Otherwise, It Cannot Be Used. In Addition, Its Diameter Should Be Consistent With The Specifications Of The Safety Latch, So As To Do. On The Safety Rope, There Shall Be No Looseness, Broken Strand Or Knot. On The Safety Lock, It Is Required To Be Intact And Complete, And Have Clear Direction Identification For Easy Use.