News

When We Operate The Machine, Failure Is Inevitable, But Some Machines May Cause Fire If They Fail. But What Should We Do In Case Of Fire When We Are Operating The Cold Rolling Mill? We Should Do Two Things To Ensure Our Personal Safety. 1、 What Should I Do To Find The Cold Rolling Mill On Fire? 1. First Of All, We Should Calm Down, And The Carbon Dioxide Fire Alarm Should Be In The Manual State. 2. In Case Of Fire In The Cold Rolling Mill, Press The Fire Button Immediately And Command To Put Out The Fire. 2、 Specific Measures 1. If The Protection Area Sends Out An Alarm, The Nearest Personnel And The Main Operator Shall Make A Practical Judgment On The Current Situation. 2. After Starting The System To Put Out The Fire, Sufficient Time Shall Be Reserved For Putting Out The Fire. If The Step Is Successful, The Carbon Dioxide Fire Shall Be Put Out Again. 3. If Carbon Dioxide Can't Put Out The Fire, We Should Use Fire Hydrant To Put Out The Fire And Turn On The Fire Hydrant. 4. When The Fire Leads To Power Failure, We Should Forget The Light Place To Run At This Time. 5. When Our Operators Hear The Alarm, We Shall Immediately Stop The Operation Of The Equipment And Make Relevant Preparations.