News

There Are Many Kinds Of Window Cleaning Machines. Today We Mainly Introduce Two Kinds Of Window Cleaning Machines, One Is The Suspension Type Window Cleaning Machine, The Other Is The Slide Type Window Cleaning Machine. Let's Take A Look At The Different Properties Of These Two Kinds Of Window Cleaners. Hope To Be Able To Buy Or Use A Window Cleaner Friends Some Guidance! The Details Are As Follows For Reference Only. The Hanging Type Window Cleaning Machine Also Belongs To The Small Window Cleaning Machine. The Continuous Horizontal Movement Of The Window Cleaning Machine Is Realized By The Walking Of The Track Climbing Device On The Track. The Track System Is Divided Into Three Parts: Embedded Parts, Track Support And Aluminum Alloy Track. The Embedded Parts Can Be Poured Horizontally On The Floor Or On The Structural Wall. The Requirements And Construction Methods Of The Embedded Parts Are The Same As Those Of The Wall Attached Track Window Cleaning Machine, Except That The Embedded Parts Are Installed On The Outside Of The Wall. After The Embedded Construction, The Track Support Is Fixed On The Embedded Steel Plate, And Then The Track Is Welded On The Track Support. The Problems That Should Be Paid Attention To In The Design And Installation Of The Roof Supporting Structure Of The Building By The Hanging Window Cleaning Machine Are Basically The Same As Those Already Mentioned By The Inserting Rod Type And The Attached Wall Rail Type Window Cleaning Machine. Slide Type Window Cleaning Machine Is Generally Aluminum Alloy Structure, Only A Few Hundred Kilograms, So Most Of The Machine Is Manual, Only A Few Are Electric. According To The Shape Of The Sky Curtain, The Slide Type Window Cleaning Machine Can Be Divided Into Two Types, Which Are Used To Clean The Round Sky Curtain And The Strip Sky Curtain. Generally, A Rotating Shaft Is Installed At The Top Of The Ceiling And A Circle Of Circular Track Is Installed At The Bottom Of The Ceiling For Cleaning The Circular Sky Curtain. When Walking, The Window Cleaning Machine Will Move Along The Track In A Circle. When Walking, The Window Cleaning Machine For Cleaning The Strip Sky Curtain Will Install A Track On Both Sides Of The Opening, And The Window Cleaning Machine Will Move Along The Track In A Reciprocating Manner. Because Of Its Light Weight And No Cantilevered Structure, The Strength Requirement Of The Track System Is Far Less Than That Of Other Types Of Window Sweepers. If The Sky Curtain Is Surrounded By Concrete Structure, Embedded Parts Shall Be Reserved On The Structure. The Form And Installation Method Of Embedded Parts Are The Same As Those Of Other Window Cleaning Machines. After Pouring, The Track And Embedded Parts Shall Be Connected As One With The Track Support; If The Sky Curtain Is Surrounded By Steel Structure, The Track Support Can Be Directly Welded On The Steel Structure During Installation.