Points For Attention In The Production Process Of Material Elevator
作者:Admin
阅读:1441
An Object Can Be Divided Into Many Types. For Example, We Need More Hoists. There Are Also Many Types, Such As Bucket Elevator, Material Elevator And So On. In Our Previous Introduction, We Have Already Introduced The Bucket Elevator, So Today We Will Talk About The Production Process Of The Material Elevator.
In Fact, The Material Elevator Is A Kind Of Feeding Equipment, Which Is Suitable For The Ore Separation Below 20 Mm. The Material Elevator And Belt Conveyor Are Driven By A Set Of Driving Device. The Electromagnetic Clutch Of The Driving Device Can Realize The Start, Stop And Functional Conversion Of The Feeder. The Belt Speed Of The Metering Belt Conveyor Of The Disc Feeder Shall Be Less Than 1 M / S. The Speed Detection Device Is Set To Measure The Belt Speed, And The Detection Rod Adjustment Is To Prevent The Weighing Roller From Skewing.
In The Production Process Of The Material Elevator, We Can Use The Three Requirements Of Uniform, Regular And Continuous Binding From The Storage Bin To The Receiving Device. When The Sand And Stone Production Line, We Can Feed The Crushing Machine Continuously And Evenly, And Coarse Screen The Materials. According To The Performance Requirements Of The Material Elevator Equipment, We Should Try To Minimize The Pressure On The Tank Body During The Configuration Design. The Effective Discharge Of The Bin Material Should Not Be Greater Than One Quarter Of The Tank Width. In Order Not To Affect The Performance Of The Feeder, We Should Not Fix The Ore Blocking Plate On The Tank Body.