News

We All Know That The Hanging Basket Is Used In The High-altitude Work, And When We Operate The Hanging Basket, It Also Has Certain Danger, So We Must Do A Good Job Of Protection To Protect Our Own Safety, But Also From The Hanging Basket Itself To Do Testing, Eliminate All The Causes Of Accidents, So How Should We Specifically Test The Hanging Basket? Don't Worry, Huake Machinery Will Speed Us Up. 1. We Need To Check The Insulation Of The Electrical System To See If It Meets The Relevant Requirements. 2. When I Carry Out No-load Test, This Is Actually To See Whether All Parts Are Normal And Safe. 3. This Static Load Test Can Be Classified. Generally, It Will Be Tested According To The Percentage System Of The Load, And The Corresponding Lifting, Safety Self-locking And Other Tests Will Be Carried Out. If There Is Any Abnormal Situation, We Need To Stop The Machine Immediately For Maintenance. 4. If The Last Test Passed, Then We Will Start The Overload Test, Which Means That The Overload Is 1.1 Or 1.25 Times Of The Source Load. If There Is Any Unsafe Situation During The Test, We Should Stop The Test Immediately And Find Out The Reason For Repair. 5. There Is Also An Impact Test, Which Has Two Aspects: One Is To Conduct The Impact Test Of Power Failure, And The Other Is The Free Fall Test Of Safety Lock. The Former Is Doing A Safety Self-locking If It Is Lifting When The Basket Is Loaded And Then Falling Rapidly. The Latter Is Used To Check The Safety Of The Self-locking Device, The Tensile Strength Of The Wire Rope And Whether The Transmission Position Is Damaged.