News

As We All Know, We Usually Have Baskets To Work At Heights, But If There Is A Problem With The Baskets, It Is Very Dangerous. So We Have To Test The Safety Performance Of The Basket. Wuxi Huake Mechanical Equipment Will Take Us To See The Specific Inspection Steps. 1. We Need To Check The Appearance And Electrical Control System, Including Its Insulation Performance. See If They Meet The Design Requirements. 2. No Load Operation Test Can Be Carried Out: Check Whether All Transmission Parts Are Safe, Reliable And Normal. 3. Static Load Test: Load Test Shall Be Carried Out According To The Rated Load In Different Periods, As Well As Lifting And Safety Self-locking Test. The Free Fall Test Of Safety Lock Is Used To Check Whether It Is In Normal Operation. In Case Of Any Abnormality, We Should Stop The Test Immediately And Carry Out Inspection And Maintenance. 4. Load Test: When The Last Test Is Accepted, We Will Enter The Overload Test. This Overload Is Actually 1.1 Times Or 1.25 Times Of The Original Load. At The Same Time Of Loading, We Also Need To Check The Main Stressed Parts Of The Basket To See If They Are In Good Condition And How The Operation Changes. If There Is Any Unsafe Situation, Stop The Test Immediately, Find Out The Reason, And Conduct The Test After Handling. 5. Impact Test: It Can Be Divided Into Two Categories, One Is To Test According To The Load Of 630kg, The Other Is To Check Whether The Safety Lock Is Reliable By Using The Free Fall Test Of The Safety Lock. Through The Brief Introduction Of These Five Steps, I Believe That You Should Also Do A Simple Inspection Of The Basket. For The Sake Of Our High-altitude Workers' Life Safety, The Inspection Of The Basket Must Be Done In Place.