News

In The Previous Article, We Have Explained The Maintenance Of The Construction Lift In Detail, So You Should Understand This Aspect, And Have A Certain Understanding Of The Construction Lift, Rather Than Know Nothing About It. Therefore, On This Basis, Today's Editor Will Continue To Introduce This Aspect And Teach You How To Use This Elevator Safely, So As To Ensure Their Own Safety And Operation Safety. The Safe Use Of Construction Elevator Mainly Includes: (1) The User Of The Construction Elevator Shall Establish A Complete Management System, Designate Full-time Organizations And Management Personnel, And Clarify The Management Responsibility System Of Personnel, So As To Be Able To Implement To The People. (2) The Operators Shall Receive Special Training And Assessment, And Shall Take The Post With Certificate, Otherwise They Cannot Operate. (3) The Operator Shall Do A Good Job In Daily Inspection Of The Lift, And Be Able To Carry Out No-load And Full Load Trial Operation. （4） Establish A Regular Inspection And Maintenance System, So As To Be Able To Detect Safety Hazards In Time. (5) When The Elevator Runs To The Upper And Lower Levels, It Can Not Be Stopped By Colliding With The Limit Switch. (6) When The Wind Force Reaches Level 6 Or Above, The Elevator Can Not Be Used, And The Cage Shall Be Lowered To The Ground. (7) Both Sides Of The Material Transportation Channel Of Each Docking Layer Must Be Protected. (8) The Construction Elevator Shall Be Installed With Grounding Protection And Lightning Protection Device According To The Requirements. (9) The Maintenance Of The Elevator Is Strictly Prohibited During Its Operation.