News

Today, Xiaobian Specially Collected Some Information About The Classification Features And Selection Considerations Of Window Cleaning Machine Products On The Internet. Through Various Comparisons, I Hope To Give Some Guidance And Suggestions To Friends Who Want To Buy Hydraulic Press! According To The Standard Of Window Cleaning Machine, Window Cleaning Machine Can Be Divided Into: Roof Track Type (referred To As Track Type), Wheel Load Type, Hanging Track Type (referred To As Hanging Type), Pulley Type, Stick Type And Slide Type. The Major Feature Of Window Cleaning Machine Is Non-standard Electromechanical Equipment. The Height, Appearance, Facade Structure And Roof Space Dimensions Of Buildings Are Different, So It Is Difficult To Find Two Same Window Cleaning Machines. According To The Unique Building Form And Function Of Each Building, When Selecting Window Cleaning Machine, The Following Points Shall Be Considered Based On The Three Principles Of Safety, Economy And Practicability: (1) Rail Type Is Preferred, With High Degree Of Automation, Safety And Reliability; (2) Whether The Roof Space Channel And Facade Structure Are Suitable For The Selected Window Cleaning Model; (3) Whether The Selected Window Cleaning Machine Meets The Structural Bearing Requirements; (4) The Selected Window Cleaning Machine Shall Not Affect The Beauty Of The Building As Much As Possible; (5) Can The Owner Bear The Cost Of Window Cleaning Machine; (6) Can We Select A Small Number Of Units To Complete The Operation Of The Whole Building. Hanging Window Cleaner The Hanging Type Window Cleaning Machine Also Belongs To The Small Window Cleaning Machine. The Continuous Horizontal Movement Of The Window Cleaning Machine Is Realized By The Walking Of The Track Climbing Device On The Track. The Track System Is Divided Into Three Parts: Embedded Parts, Track Support And Aluminum Alloy Track. The Embedded Parts Can Be Poured Horizontally On The Floor Or On The Structural Wall. The Requirements And Construction Methods Of The Embedded Parts Are The Same As Those Of The Wall Attached Track Window Cleaning Machine, Except That The Embedded Parts Are Installed On The Outside Of The Wall. After The Embedded Construction, The Track Support Is Fixed On The Embedded Steel Plate, And Then The Track Is Welded On The Track Support.