News

Before, There Were Serious Safety Accidents Due To The Problem Of Electric Hanging Basket During The Construction, Which Had To Remind Us Again To Pay Attention To The Safety Of The Hanging Basket For High-altitude Work. Therefore, When We Purchase The Basket, We Must Choose The Qualified Products Produced By The Regular Manufacturers, Of Course, Whether The Products Are Qualified Is Also To Be Tested. For Example: First Of All, Check Whether The Bolts Of Each Assembly Part Of The Basket Are Fastened; Whether The Motor Can Operate Normally; Whether The Operation Switch Of The Electric Control Box Responds Sensitively; Whether The Emergency Stop Switch On The Basket Can Work Normally In Case Of Emergency; Whether The Safety Lock Has Met The Specified Requirements; These Should Be Carefully Checked And No One Should Be Missed. In Addition To The Above Mentioned Combined Parts, It Also Depends On The Fastening Degree Of The Suspension System Of The Work Basket. There Are Provisions On This Point. Generally, The Ratio Of The Front And Rear Arm Before The Fulcrum Is 1:2.5 Or More. Secondly, The Reinforcement Rope Is Also Another Aspect, Which Is Mainly Based On The Basic Principle That After The Reinforcement Rope Is Tensioned, The Lifting Beam Will Not Rise. The Wire Rope Shall Not Have Burr Or Segment Wire, And The Diameter Shall Meet The Standard. For Other Configurations Of The Electric Basket, Such As The Distribution Box, It Should Also Meet The Safety Standards; Cable; Ensure That The Connection Is Reliable And Will Not Land; Leakage Protector, Sensitive, Safe And Effective In Use. If All Of These Meet The Requirements And Are Not Finished, The Lifting Operation Test Shall Be Carried Out, And The Operation Of The Device Shall Be Further Checked In The Process. As A Manufacturer, We Also Need To Provide Us With Product Qualification Certificates And Test Reports As A Basis.